WATER BASED PENETRATING SEALER

High performance penetrating sealer designed to provide premium protection for up to 10 years.

» Will not alter appearance of fine stone
» Protects against stains
» Fast curing formula

DIRECTIONS FOR USE:
New grout must be fully cured before application (min 48 hours).
Existing grout must be totally clean, dry and chemical free.

Coverage:
750 linear metres per 1L (2 coats on 3mm grout).
260 linear metres per 1L (2 coats on 8mm grout).

APPLICATION:
1. Apply 2-3 coats by generously saturating the grout line using a grout sealer
applicator or soft bristle paint brush.
2. Using absorbent towelling, wipe off any
sealer remaining on the grout surface after 10 minutes of each application.
DO NOT ALLOW THE SURFACE TO DRY DURING THIS TIME.
3. Allow 20 minutes between coats. Apply second coat whilst previous coat is still wet.
4. Keep dry for 12 hours. Keep traffic off the area for 2 hours. Sealer achieves a full cure in 24-48 hours.