SOLVENT BASED PENETRATING SEALER

Professionally formulated sealer ideal for low porosity tiles.

» Exceptional protection for up to 10 years
» Allows natural stone to breathe
» Protects against stains

DIRECTIONS FOR USE:
New installations must be fully cured before application (min 48 hours). Existing stone, tile & grout must be totally clean, dry & chemical free. Coverage: 10 to 30m2.

APPLICATION:
1. Apply 2-3 coats by generously saturating the surface using a polish applicator, roller or sprayer.
2. Using a squeegee, absorbent towelling or applicator, wipe off any sealer remaining on the surface after 10 minutes of each application. Do not allow the surface to dry during this time.
3. Allow 20 minutes between coats. Apply second coat when first coat is still wet.
4. Keep traffic off for 2 hours. Keep dry for 12 hours. Achieves a full cure in 24-48 hours.